T-Motor F4

Description Specification：Mamba DJI F405 MK2 Flight Controller Support Connecting DJI System without SolderingMCU: 168MHz STM32F405RGT6GYRO: MPU6000 Barometer: Yes OSD: Yes Blackbox: 16M Flash Memory Uarts: 6Set ESC Soft: Dshot300/600/1200 ESC Telemetry: Yes Power Led: Yes LED Controller: BF LED/MB LED（ 4 Set 2812 LED） F.Port: Yes RSSI: Yes Buzz: Yes Input: 3~6S Lipo (12.6~25.2V) TVS Protection: Yes BEC:3.3V 0.5A& 5V 3A &（DJI） 9V 3A MOUNTING: 30.5mm, M3

Description MAMBA | Super Big Soldering Pad MAMBA Basic F405 MINI MK3.5Diagram Link From Help Centre Link (diatone.us)FixedAdd I2C function When you connect the USB, the receiver and OSD settings can be saved Increase the pad area LED signal selection （when Mamba Led sys avaiable） BEC short circuit protection TVS instant high voltage protection 30V UpdateUpgrade the anti-interference cable Use Typec（Most） The pad area of the Mini flight controller (20×20) increased by 140% AddedAdd self-recovery insurance to the receiver's 5V power supply. Increase the camera VCC power supply pad. The standard flight controller (30.5×30.5) adds a spare pad. Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference. Specification：Mamba Basic F405MINI MK3.5 FCMCU: 168MHz STM32F405RGT6 IMU: MPU6000 Barometer: Yes OSD: Yes Blackbox: 16M Flash Memory Uarts: 5 Set ESC Soft: Dshot300/600/1200 ESC Telemetry: Yes Power Led: Yes LED Controller: BF LED F.Port: No RSSI: Yes Buzz: Yes Input: 2~6S Lipo (8.4~25.2V) TVS Protection: Yes BEC:3.3V 0.5A&5V 2.5A MOUNTING: 20mm,M2