Mostrando los 6 resultados

MAMBA MASTER F55_96K Dshot1200 4IN1 ESC 55A 6S

MASTER SERIES 96K ESC -The most practical High-speed ESC- F350 High-speed MCU 168MHz - EMI Anti-interference isolation design - 14oz Super-copper bigger current - Japan Toshiba 40V/0.8mΩ rated mosfetESC Specification:INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V) CONTINUE CURRENT:55A×4 BURST CURRENT:65A (10S) BEC: No Target:BLHeli_32 Master F55_96K SOFT: Dshot300/600/1200 PWM:48~96K TVS Protection: Yes MOUNTING: 30.5mm/M3Supply : 8pin sh1.0 ×2 AMASS Original XT60 High-Frequency 470uF/35V

MAMBA F40MK2 Dshot600 4IN1 ESC 40A 6S

Description ESC-MAMBA F40 MK2 4IN1 40A ESCDescription: INPUT VOLTAGE: 3~6S Lipo (12.6V~25V) CONTINUE CURRENT: 40A×4 BURST CURRENT: 50A (10S) BEC: NO Size:36.5×46.5×6.4mm MOUNTING: 30.5mm/M3 CURR: 169A Capacitance: Samsung 564UF(47UF×12pcs) About Current: 50A/4S OR 40A/5S (The same total power) Motor:Suggest Below 1900KV for 6SPackage included: 1 x ESC-MAMBA F40

PDB Matek HUB 5v 12v

Mini POWER HUB has been designed to provide the best possible performance and reliability in a small 36*36mm PCB. The HUB distributes power from a battery pack to 4 ESCs, as well as providing synchronised & regulated DC outputs for powering cameras, servos, video transmitters, LEDs, etc. Batteries may range from 3S to 6S LiPo. The HUB also features convenient solder bridge of various voltage for camera & video TX. General: Input voltage range (3S-6S operation): 9 - 26VDC Regulated 5V and 12V outputs LED power indicators ( 5V & 12V outputs ) 4 ESC outputs ESC outputs: Continuous current: 20A per output Peak current (10 seconds/minute): 25A per output BEC 5V output: Designed for RC Receivers, Flight controllers, OSD, and Servos. DC/DC synchronous buck regulator, Efficiency is up to 95%. Voltage: 5.0 +/- 0.1VDC Continuous current: 3 Amps Short-circuit tolerant (10 seconds/minute) LED (indicates voltage is in regulation) BEC 12V output: The battery should be 4S~6S Li